ML370 Fan Control

[snight123]

Hi, I have an ML370 G2 running Sco Openserver 6. The fans in the system are permenantly running at max speed. Do i need to configure the system so how so that once it is booted the fans slow down?

Thanks

 

[blister911]

I think you need to install the support pack. I see that only Openserver 5 is listed, but here is the link:

http://h18007.www1.hp.com/support/files/server/us/locate/26_1341.html

 

[TheLad]

You may need to apply the latest BIOS firmware to the server in addition to installing the Proliant Support pack as mentioned above.

--------------------------------------
"Insert funny comment in here!"
--------------------------------------

 

[snight123]

Thanks, I'll download the support pack and see if it cures it. I think i may need the UnixWare pack rather than the Openserver 5.0.x one as i think Openserver 6 is based on Unixware 7.

Thanks

 

[snight123]

Hi,

Thanks for the help. I got it sorted. Had to contact HP for the Tarball of the download as it was not available straight away. The link if anyone needs it is

http://h18023.www1.hp.com/support/files/server/us/download/25903.html

Thanks again, i can now hear myself think above this server.