ML350 - G2 (I think)

[Gareth1978]

I'm looking for some advice on where I can download the software to make a bootable disk that will allow me to configure the feature card installed on a ML350 (G2 I think) that we have aquired.

I have tried downloading the smartstart software which I think would work but it doesn't.

I'm only used to dealing with straight array controllers and this feature card does SCSI control, ethernet and VGA.

If anyone could advise me it would be very much apreciated. I've looked roudn and round but there seem to be too many things that sound like they might do the job but don't.

Thank you

**One day, I will find a question that no one else has answered........and will also know the answer to it ! **

 

[phillid2]

Did you use the correct version of Smartstart? Sometimes the newer versions are not compatible with the older hardware. I have an ML530 and I use 5.51.

Don Phillips

http://worthingtonengineering.com

 

[TheLad]

The downloads for the ML350 G2 are here:

http://h18023.www1.hp.com/support/files/server/us/locate/69_2588.html#66

The Smartstart version for the ML350 G2 server is v7.60 (under the Software - CD sestion)

--------------------------------------
"Insert funny comment in here!"
--------------------------------------

 

[Gareth1978]

Thank you - I'm not sure If I've got a G2 or not but I'll give that a try

**One day, I will find a question that no one else has answered........and will also know the answer to it ! **