Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MIXING MAIN NUMBER

Status
Not open for further replies.
jftg73

jftg73

Technical User
Aug 7, 2003
200
MX
HI

I HAVE A OP. 61C RLS. 23.55, I HAD WORKING MY PBX WITH A TELCO 1 (IN/OUT CALLS) AND MAIN NUMBER 53291100 AND NOW WITH TELCO 1 ONLY HAVE INCOMING CALLS AND WITH TELCO 2 I HAVE IN/OUT CALLS WITH OTHER MAIN NUMBER 50122300, IF I NEED CALL WITH TELCO 1 AT THE MAIN NUMBER (53291100) I GET CONNECTION. HOW I CAN DO THAT BY TELCO 2 WERE THE SAME?

THAT LD'S I NEED FOR SETUP IN MY PBX AND USE THE TWO MAIN NUMBERS AND A EXAMPLE OF THIS. THANKS FOR YOUR ASSITANCE.
 
Status
Not open for further replies.

Similar threads

ashwincjoshi
  • Locked
  • Question
Issue with CDP Configuration on Nortel CS1000 - One Number Works, One Doesn't
Replies
1
Views
230
Firebird Scrambler
Firebird Scrambler
phoneswitchnewbie
  • Locked
  • Question
Map extension to outgoing 800 number 1
Replies
6
Views
148
phoneswitchnewbie
phoneswitchnewbie
phonebunny
  • Locked
  • Question
How to build phone using a CDP'd number 1
Replies
4
Views
180
bignose21
bignose21
Casey Jordan
  • Locked
  • Question
Meridian 61c - Forwarding to an External Number...
Replies
5
Views
149
Firebird Scrambler
Firebird Scrambler
Everest67
  • Locked
  • Question
Active station numbers unknown if actually used on end user side
Replies
1
Views
108
Firebird Scrambler
Firebird Scrambler

Part and Inventory Search

Sponsor

Back
Top