Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mixing ISDN and non ISDN circuits
- Thread starter navy1
- Start date
Would it not make sense to create a non-ISDN overflo trunk group instead?
What does the documentation say about mixing facility protocols?
Will the system software even allow you to do that?
I would think that if you put something non-ISDN in an ISDN trunk group that it would not function at all. Example: putting a 64k DDS channel unit in a channel bank slot provisioned for Dial Pulse Originate ckt or an FXS type; the channel unit will physically plug into the slot but nothing will happen.
Does that make sense?
....JIM....
What does the documentation say about mixing facility protocols?
Will the system software even allow you to do that?
I would think that if you put something non-ISDN in an ISDN trunk group that it would not function at all. Example: putting a 64k DDS channel unit in a channel bank slot provisioned for Dial Pulse Originate ckt or an FXS type; the channel unit will physically plug into the slot but nothing will happen.
Does that make sense?
....JIM....
- Status
Similar threads
- Question
- Locked
- Question