MiVoice 250 Trunk Related Info - Call Routing Tables- Call Routing key -Outside Party Number

[Crowtalks]

I was looking at one of my systems and I noticed under System - Trunk Related Info - Call Routing Tables- Call Routing key, it shows an option for Outside Party Number. F1 says this routes the calls according to calling party CLID instead of called number CLID.

Where would a person populate that CLID info in the system for the table to peruse?

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Call Pilot
Avaya IP Office
Mitel 3300 Advanced, 5000, SX200, NuPoint, MiCollab, MBG

 

[sarond]

You add entries like you would a DID if was set to Trunk Number. While in the CRT right click and then you can add a pattern to the list.
Just make sure that the last entry is a + and you send it to the normal ring in destination.

 

[kwbMitel]

We use that feature all the time to direct inbound calls from our Analog Line at our office to the embedded Modem.

I set it up years ago though, and havent touched it since, so details are lacking.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[Crowtalks]

Thanks!

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Call Pilot
Avaya IP Office
Mitel 3300 Advanced, 5000, SX200, NuPoint, MiCollab, MBG