Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MiVB 8.0 PR3 transfer delay

Status
Not open for further replies.

Crowtalks

Technical User
Mar 19, 2005
1,525
US
It seems like in the last couple of weeks folks started reporting a 3 or 4 second delay between the time they press the transfer key and the transfer actually takes place. If they hit transfer and hang up, the transfer doesn't take place.

I have tested it on a few phones, across several keys and inputting the extension numbers manually.

What could cause a delay in transferring calls?

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Call Pilot
Avaya IP Office
Mitel 3300 Advanced, 5000, SX200, NuPoint, MiCollab, MBG
 
I figured it out...

The transfer delay was only for transfers to CDE speedcall 3 digit numbers.

When I added a # to end of the digits, the delay went away.

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Call Pilot
Avaya IP Office
Mitel 3300 Advanced, 5000, SX200, NuPoint, MiCollab, MBG
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top