Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MITEY MITE DID TRUNK UNIT

Status
Not open for further replies.

SYQUEST

Technical User
Oct 20, 2002
2,913
US
The Mitey Mite DID trunk unit is used primarily in TAS applications. I am looking for service data, schematics, strapping options, etc. for this unit.

Any TAS people or old timers out there know of either info or equipment sources?

The only document I found (owner's info) is missing pages.

Thanks in advance for your help!

....JIM....
 
That one is a 10th generation copy with missing pages that came from the wedophones.com website which is free, but same missing pages. Neither site has schematic, etc.

Thanks for your effort anyway.

....JIM....
 
Hmmm... They charged you for a manual with missing pages? Sounds like the burden is on them to get it for you, but in the meantime...
 
No, I was not charged for the manual. I know the owner of wedophones.com and it was their source that had the missing pages, since their client only had the 6th generation copy and that's all that was available at the time Chris had it scanned.

I am hoping for some posts from some TAS types that might have some info, or are familiar with Amtelco from that era or even a former employee. Other than reverse engineering the thing, which is very time consuming.

....JIM....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top