Mitel SX50 programming and line access

[Jason Wilder]

I have been searching and hope I might find some help here. I have been getting asked to assist with the swap of phone system from Mitel SX50. To expedite the process I am being asked if there is a way to pull the line programming for each Mitel card slot in order to map to the new system without having to hunt each room at a hotel. I hope this makes sense anyway.

If anyone knows what I'm talking about, hope you can point me toward the right information.

Thank you,
Jason

 

[OldTimingMan]

Use the Data Dump Feature from the console. This will tell you which line / trunk is connected to which port. This will print to the printer port at which you need a serial printer or serial connection to a pc / laptop. Press Function, dial 97. Requires you to know a four digit access code. I believe what it wants is the System Security Code. Default is 7772. Else, you can read the database at the console.