Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel SX200icp 1

Status
Not open for further replies.

Tommytelecom

Technical User
Apr 2, 2018
1
US
Looking or help in programming a station on a mitel sx 200icp to be able to call the attendant and 911 but not call any other stations.

thanks

Tom
 
You will likely have to use tenants and class of restriction. Attendant and trunks in one tenant like 1, extensions that can call each other in another like 2, restricted in 3. #1 can talk to 2 and 3, #2 can talk to 1 and 3, #3 can talk to 1. Cor value is added to routes that deny all but 911 route for this user
 
If that phone that you're making is on a Hospitality system then restricted outgoing calls from the council by function,attendant function, guest room, room number,restrict for int only it will still call 911
 
Tennating the phone system is a stupid f****** idea. the only need to tennating a phone system is to block the voicemail from being hacked by incoming callers I've never found a need for tenants and I've been working on mitel for 20 years
 
Tennating the phone system is a stupid f****** idea. the only need to tennating a phone system is to block the voicemail from being hacked by incoming callers I've never found a need for tenants and I've been working on mitel for 20 years

I used it often for manual line phones also they said nothing about hospitality, yes you can deny room to room calls as well as int/local/ld toll control via hotel console settings but may restrict more than desired IMHO and I have worked on Mitel systems for more than 25 years. Also I hope you hear from Mitel soon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top