MITEL SX2000 FILE CREATE ERROR

[kingrat99]

After I mount the RSD and CAT INFO *.ADMIN all is good. When try to File CR *.ADMIN12MAR14 CAT, I get Device privilege violation. I can data save to hard drive but cannot data save to RSD because I cannot create a file. Any suggestion would be greatly appreciated.

 

[Lundah]

Is there a chance the RSD is full?

 

[LoopyLou]

That would be my thoughts or the write protect is on.

An apple a day keeps the doctor away. Anyone else and you need to throw it harder.

 

[Lundah]

Write protect seems much more likely, I think a full RSD spits out a different error. It's been a while since I looked at a 2K, I'm a little rusty.

 

[kingrat99]

I have 4 RSD's and all have the same issue. The write protect is off on all 4 RSD's with only a two or three files each. I only have trouble with the ADMIN side and the GUEST side is working. I deleted some files and I still cannot file create. perplexed.

 

[techymitel]

If you're doing a [cat info *.admin] to view the rsd contents then you will need to do a [file crea *.admin.admin12mar14 cat] to create the file

It looks like you are missing the volume name of the disk or are missing a period if you want to create a file called [admin.12mar14]

 

[kingrat99]

The 4 RSD's have the same issue. Write protect is off. I attempted cat del *.admin.ds25OCT11 and it deletes files from cat. When I file del *.admin.ds25OCT11, I get Cat not empty. I attempted to file create again and get the same response Device privilege violatio. Do I need to get more RSD's and format them? Can I re-format my existing RSD's????

 

[BrianWarner]

vol for rsd backupname

data save *.backupname

 

[kingrat99]

Thanks for all your advice. What I believe is the RSD drive is dirty. I took canned air and cleaned the drive. I remounted the RSD disk and now all is working. I may have to replaced the RSD drive. Thanks again.........