MITEL SX200 digital

[telemarksman]

Comrades, I went to my customers hotel. They have the WASHER/ DRYER type twin cabinets for the SX200 digital. Anyhow the cabinet with the CO cards, slot 8 a station card, port 7 lights up when I go off hook, I get DTMF tones, I get battery, polarity indication, but no dial tone.
I removed all cross connect and same exact symptoms on Red/ Orange of block. I suspect bad port.

There is a monitor & keyboard at the switch, but I nor the staff knows what to do. I suppose X1810 or 810 could be re-ddirected to another working port?

We already swapped station cards, but same symptoms. Thanks.

alwayslearning

 

[jonmyk]

You swapped station cards and you still have the problem with the same extension or did it follow the card? If you are working with an 8 port station card then you either have a SX200 analog or a sx200 analog to digital conversion.

To answer your question, yes the extension can be moved to another "working" port. Do you have any experience with a Mitel system?

"The only problem with common sense is that it's not that common

 

[telemarksman]

NO experience with this system. The cabinets say digital, using one pair of wiring throughout for extensions.

alwayslearning

 

[SNSSMIS]

hook up a modem and call a Mitel Dealer that can program it for you. TSAChoice in Asheville NC (Western Carolina) can help with programming. Very Good service staff...

http://www.tsachoice.com