Mitel PRI daughter card ? 2

[hotelmotelpatel]

Does the mitel Pri daughter card have to be present on the pri card,(L0 and L1)? How else would you connect to the PRI circuit if the daughter card is not attached? I could not find a part number on the daughter card to research this properly. Thanks in advanced!

 

[kwbMitel]

Too many assumptions required to answer this.

Please provide the system type and card type and software versions that are applicable

**********************************************
What's most important is that you realise ... There is no spoon.

 

[hotelmotelpatel]

The pri card is Mitel 9109-615-001 PRI Card T1 / E1, for sx-200 systems. There is a daughter card on it for the L0 and L1 ports. I take it that you need this daughter card to connect to the pri service.The system software is 4.0 or higher.

 

[jpruder]

Yes you need the module plus a digital link license, have the switches set correctly and imat software for programming.

 

[hotelmotelpatel]

Thanks for the reply, and confirming this for me.

 

[pandabear1]

the switch settings are very important as to where you install the Pri card, control cabinet or peripheral, if incorrect the Pri card will not work.