Hello,
We're adding a 2nd DHCP server as we're working towards retiring the original. The 2nd DHCP server is Server 2008 R2 and the DHCP configuration was exported from the first one so it has the exact same scope options (Mitel ones are 128,129,130,132,133). The system is Mitel 3300 PBX and 5330 IP Phones. The phone starts booting off Windows DHCP then it sees Option 128 and reads VLAN 10 Priority 6 as it's supposed to but then says TFTP server unavailable and stops reading the Windows DHCP address (192.168.1.x) and below it it says ICP 10.10.10.2. It sits like that for awhile and then keeps rebooting. Oh and yes 10.10.10.2 is the TFTP so I'm lost. Any ideas?
We're adding a 2nd DHCP server as we're working towards retiring the original. The 2nd DHCP server is Server 2008 R2 and the DHCP configuration was exported from the first one so it has the exact same scope options (Mitel ones are 128,129,130,132,133). The system is Mitel 3300 PBX and 5330 IP Phones. The phone starts booting off Windows DHCP then it sees Option 128 and reads VLAN 10 Priority 6 as it's supposed to but then says TFTP server unavailable and stops reading the Windows DHCP address (192.168.1.x) and below it it says ICP 10.10.10.2. It sits like that for awhile and then keeps rebooting. Oh and yes 10.10.10.2 is the TFTP so I'm lost. Any ideas?