Mitel NuPoint + ... Avaya IP Office?

[V3RTechNP]

I know that a NuPoint blade inside MAS can be integrated via SIP with Mitel 5000 but has any of you ever tried integrating a MAS/NP via SIP with a third party PBX like Avaya IP Office?

 

[Billz66]

I dont think they re actually SIP connections , they are Minet - programmed as 5020 or 5240 exts on a MCD ( off the top of my head).

The AWC( conference ports )are sip .


If I never did anything I'd never done before , I'd never do anything.....

 

[LoopyLou]

If the Nupoint in the MAS can be integrated via SIP to the 5000, then I would guess it could be setup to other PBX's. Never tried it.

The beatings will continue until morale improves.

 

[V3RTechNP]

@Billz66
The MCD/3300 integration use emulated IP phones yes, so MiNet protocol.
But the 5000 integration use SIP trunks, according to Mitel's documentation (never linked a NP to 5000 yet).

@LoopyLou
That's what I'm thinking too. Sadly we don't have a MAS demo in-house to test it out. Hoped someone would have tried it.

 

[Waldosworld]

5000 only supports NP via SIP trunks.
As for the original question, big time outside the box.
One for the lab when I have the time!

 

[Billz66]

We passed on the 5000 , havent seen or touched one

If I never did anything I'd never done before , I'd never do anything.....

 

[V3RTechNP]

@Waldosworld

Please, tell me the results if you ever try.