Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel MCD SIP No Audio on Incoming Calls

Status
Not open for further replies.

trapshooter

Programmer
Apr 6, 2006
24
US
I have a VMCD and a VMBG with SIP trunks. The VMBG is set up in the DMZ behind a NAT. Using the VMBG for the SIP trunking. I have two issues; 1. Calls come in and connect but no audio eithe way. 2. Outgoing calls sound great both ways but afte 30 seconds or so the call is dropped. Any ideas
 
You're not using wireless handsets are you?

Don't confuse DTMF with DTF. They have very different meanings....
 
Firewall allowing traffic to the 3300 ( allows call setup ) but not allowing it to the subnets containing phones?

The beatings will continue until morale improves.
 
calls cutting off is likely to be session timer if it always the same length.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top