Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MITEL CONFIGURATION

Status
Not open for further replies.

ogedengbe

Programmer
Aug 5, 2013
6
NG
Hi everyone

I am deploying 500IP phones in an institution. The IP address range can only go between 1 and 250. Can somebody tell me how to increase this to 500 so that other IP Phones can pick IP Address in the range. This needs urgent attention.

Ogedengbe
 
Subnet Mask 255.255.255.0 = 254 Hosts
Subnet Mask 255.255.254.0 = 510 Hosts
Subnet Mask 255.255.252.0 = 1022 Hosts

If you are not familiar with Subnetting, you need to find someone who is.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Using a bigger subnet like KWBmitel suggests is the way to go, multiple vlans and scope like danramirez says also works, but looks to me like a lot more work.
And when security is an issue, proper subnetting or multiple vlans doesnt make any difference.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top