mitel box

[macphoneguy]

I have the need for putting a couple of Mitel 4025 sets in box's in short something to protect the 4025 from External Smoke/Soot as these would be in a Boiler plant. . . So far everything I have seen from Allentel & Gaitronics is too small width Wise, if there is a different manufacture I can get them From please let me know it need to be atleast 9.5 inch's wide and of course hold a RJ-11W jack on the Back side.

Thanks in Advance

 

[skip555]

GTE used to make a really wide one I know we used to find them used at the refurbers you could watch ebay for a couple if your not in a hurry

you might want to look for a local metal fabracator and see how much to make a couple up out of aluminaum or you might want to give it a go yourself with aluminum sheet and angle shouldnt be too hard .

 

[skip555]

one other thought In addtion to the box's I would get the plastic covers that cover the face and dial pad

http://www.viziflex.com/cartexe/shopdisplayproducts.asp?id=13&cat=Viziflex+Seels

we have used these in the past to protect phones in dirty enviorments just plan on changing them every 6-12months

 

[macphoneguy]

Hum, I also found this

http://www.twacomm.com/Catalog/Model_GB31858.htm?SID=QGK2HQFQXG818MMLD55P

which looks like it might fit the bill,