Mitel 5000 night mode 1

[Mitelmatt]

Hi all

Mitel 5000 version 6. I want to be able to put the system in night mode but from a analogue device. Customer has only 1 system phone and the rest analogue. Finds it annoying he needs to go and find the system phone

Seems a simple ask but can find a way of doing it as can't have single line phones as administrator

Any ideas?

 

[BrianWarner]

Use STAR application.

 

[Mitelmatt]

Needs to be manual I'm afraid

 

[amriddle01]

Can't be done, but..

Customer has only 1 system phone and the rest analogue. Finds it annoying he needs to go and find the system phone

He shouldn't be so tight and should have bought/used some decent handsets then, to allow the flexibility and functionality of the system to be used

 

[sarond]

Can't the analogue's dial Feature code for Night Mode?

 

[sarond]

Sorry just read can't have analogues as admin phone.

Another option could be to have the answering position set as a phantom that is normally system forwarded to your current answering position. You can then set the remote forwarding of the phantom to the night position you want and remove when finished.

 

[yankblan]

Create a config assistant for the digital phone, and log in to it from any phone to toggle on/off night service

ACSS-SME

http://interconnexionsld.ca/