Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel 5000 External Paging - Relay?

Status
Not open for further replies.

kwbMitel

Technical User
Oct 11, 2005
11,504
CA
There is a relay on the back of the controller but acccording to my reading all it does is open doors.

Does the 5000 have any way of sending a contact closure when paging is activated to control a paging amp?

Inquiring minds want to know.

**********************************************
What's most important is that you realise ... There is no spoon.
 
I haven't run across the need so far, for paging anyway. I have with Door entry systems, and I rely on external EQ to be triggered via DTMF (#). Any connectivity requiring DTMF (Door entry, page zone controllers) needs to be connected via a trunk port to pass DTMF. Are you connecting via the MIC input, and need a contact closure?
 
The customer want to connect paging to their in-house music system

As such, it would be easiest to send a contact closure to cut off the music before paging.

I have advised them that they require Voice Activated control.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top