Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel 5000 and CPN Substitution? 1

Status
Not open for further replies.

vlevalois

IS-IT--Management
Jun 30, 2009
181
US
Does anyone know if there's a way to have CPN Substitution with a PRI connected to the Mitel 5000?

Thanks!
 
From the help.

Help File said:
Depending on how flags are set, each phone, CO trunk group and/or SIP peer trunk group can be programmed to send an identifying number when a call is placed. This is called the "Calling Party Number." (This information is required for emergency calls in some states.) You can program any number up to 48 numeric characters (up to 15 alphanumeric characters, except for :, “, and “ for a voice mail or SIP voice mail application) in the Calling Party Number field. However, check with your service provider to determine their specific requirements for this field. This number will be sent in the ISDN or SIP setup message in the Calling Party Number Information Element. In addition, the system will also send the extension number of the phone in the Calling Party Number Subaddress Information Element. The CO (local exchange) should ignore this information element if it does not support it. In the case of SIP, it will influence the "From," "Contact," and "P-Asserted-Identity" fields in the SIP headers.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top