Client has a CICS, version 30NIG00 which is 4.1 restricted software. I-ATA shows as being on ext 229. I noticed that he had 2 line cards on the KSU as well, so I connect an existing line to CO05, programmed a test phone to have that line & it worked. I then went to check the keycode for my record and there are none listed. How is that possible?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Missing Keycode
- Thread starter MooreTel
- Start date
- Thread starter
- #3
When I checked the version under maintenance it showed 30NIG00 which told me me 4.1 restricted.
When I checked under "Software Keys" it shows the system ID #, next to software keys then "Key 1:_ _ _ _ _ . There's no "Next" option. Shouldn't a keycode be listed?
I know he had 3 lines on the system when he bought it from Bell originally but had another noltary move in for a while, shared the system and expanded it for more lines at one point. Now the other notary has moved on so we're back to 3 lines but with 2 line cards.
When I checked under "Software Keys" it shows the system ID #, next to software keys then "Key 1:_ _ _ _ _ . There's no "Next" option. Shouldn't a keycode be listed?
I know he had 3 lines on the system when he bought it from Bell originally but had another noltary move in for a while, shared the system and expanded it for more lines at one point. Now the other notary has moved on so we're back to 3 lines but with 2 line cards.
- Thread starter
- #5
At the heading Software keys you can only enter new keycodes. I wish there was a way to see the keycodes already installed, especially the PRI Enabler on the MICS. Oh well.
Brian Cox
Georgia Telephone
Brian Cox
Georgia Telephone
- Status
Similar threads
- Locked
- Question
- Locked
- Question