MISSED MAGAZING((NO CONTACT )) IN A LIM

[ALIGANUNI]

HELLO,

MY PROBLEM IS: AFTER A SUDDEN SHUT DOWN TO A LIM IN OUR SYSTEM, ONE MAGAZINE BECAME NOT AVAILABLE, AND ALL EXTENSIONS INITIATED THERE ARE BLOCKED NOW ((WHEN YOU DIAL)).

CNLIP COMMAND SHOWS ONLY ONE MAGAZINE,
AND
((LSFTI)) GIVES THAT THERE IS NO CONTACT WHITH DSU 1

I TRIED TO RESTART THE LIM , NOTHING HAPPENED

I ALSO CHANGED THE DSU BOARD, STILL THE SAME

BLOCKED AND DEBLOCKED THE LIM, RESTARTED THE WHOLE EXCHANGE, NOTHING HAPPENED.


ANY IDEA,


NOTE: I AM NOT EXPERT

 

[parnum]

Have you changed the LSU board and the LSU-DSU cable?

Best parnum

 

[ceejay55]

Have you actually checked the "add info" on ALLOP ?
It will tell you what is missing , Most likely power on PU4,PU5 ,RG5DC
All else fails put use a meter and test voltages

 

[ALIGANUNI]

THANK U ALL,

ACTUALLY AFTER TRYING DIFFERENT SOLUTIONS , STARTING FROM SOFTWARE AND TO HARDWARE, THE PROBLEM WAS SOLVED ONLY BY TURNING OFF THAT LIM BY REMOVING POWER CABLE AND THEN PUT IT ON AGAIN, SO THE EXCHANGE DID RELOAD AGAIN AND IT WAS SOLVED.