Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MIS 5.0 10 Digit dialing

Status
Not open for further replies.

mailmax

Vendor
Mar 30, 2014
32
US
10 digit dilaing is coming in June and I tried to dial out with the AC and number or local calling. The MICS wil only accept 7. I went to look for the Dialing Plan to change the DEFAULT number from 7 to 10 but it is not there. Is it under a different menu option?
 
No go into System Programming and change your Public Dial Plan to 10 digits.

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
I can't find it. I know what section you are talking about I have been in it all the time but it is not there. DO you think it is under another section this is MICS 5.0. I am using SYSADMIN+ to log in the telest.

They have a PRI.
 
If you're using the administrator password you won't find it. You need to use the installer password.

Marv ccna
telemarvlogosmall.gif

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
 
Ok thanks. Can I use the RAD with the NRU 11.0 program to access this MICS?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top