Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mirroring problem
- Thread starter 2winner
- Start date
(1) If you say Mirror status on the server console what happens?
(2) Does it give you a synchronization error every 30 minutes?
(3) What mirror group details do you have for each partition?
I have two 50 Gb SCSI 10,000 rpm drives with SYS and DATA on one mirrored on the other. This is a standalone server. Works fine BUT an abort damaged the mirror, was recognized on reboot and rebuilt it. Netware 6 SP2 running only file and print.
I found that setting up mirroring wasn't intuitive to me - maybe the new interface.
(2) Does it give you a synchronization error every 30 minutes?
(3) What mirror group details do you have for each partition?
I have two 50 Gb SCSI 10,000 rpm drives with SYS and DATA on one mirrored on the other. This is a standalone server. Works fine BUT an abort damaged the mirror, was recognized on reboot and rebuilt it. Netware 6 SP2 running only file and print.
I found that setting up mirroring wasn't intuitive to me - maybe the new interface.
- Status
Similar threads
- Locked
- Question