I have a problem setting up Windows Server 2003 on a mirrored drive. First, heres my configuration:
40GB HD as Primary Master
CD-Rom Drive as Primary Slave
40GB HD as Secoundary Master (Same drive as the Primary Master)
now, I have installed Windows Server 2003 Standard Edition on the Primary Master Drive. After the Installation, I converted both harddrives to Dynamic Disks. I then made a right-click on the drive with the OS in the drive management, and selected to mirror the drive. In the upcomming dialog I selected the 2nd 40 GB drive. Then it synchronized both drives and every thing seemed to be fine.
BUT: I tryed to test it by shutting down the PC, disconnecting the Primary Master Drive, and Connected the Secondary Master as the Primary Master. Booted up, but after the POST I only see a blinking curser in the upper left corner and its not booting.
so, did I do anything wrong, or did I miss anything?
40GB HD as Primary Master
CD-Rom Drive as Primary Slave
40GB HD as Secoundary Master (Same drive as the Primary Master)
now, I have installed Windows Server 2003 Standard Edition on the Primary Master Drive. After the Installation, I converted both harddrives to Dynamic Disks. I then made a right-click on the drive with the OS in the drive management, and selected to mirror the drive. In the upcomming dialog I selected the 2nd 40 GB drive. Then it synchronized both drives and every thing seemed to be fine.
BUT: I tryed to test it by shutting down the PC, disconnecting the Primary Master Drive, and Connected the Secondary Master as the Primary Master. Booted up, but after the POST I only see a blinking curser in the upper left corner and its not booting.
so, did I do anything wrong, or did I miss anything?