Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

miran card

Status
Not open for further replies.

ansar786

Technical User
May 5, 2012
12
PK
I bought MIRAN card new. i donot know how to configure it or even install it please help me out.
 
I needs a dongle and a keycode that ties the dongle on the MIRAN to the site ID of your switch. If you have those then configure at least one channel and then push the card in (If you don't config a channel it stops during the boot). Plug in a serial port watch the boot, once up login and set the keycode.
 
There's a whole lot of useful information here regarding the commissioning of a MIRAN card.
I don't want to scare you, but I would rather install an entire CS1KM than face another one of those nightmares!!

Now that I've got your pulse racing... Do you have the serial cable that plugs into the faceplate?
And the amphenol adaptor thingy for the backplane?

Quick question: For what purpose do you intend to use the card MOH, RAN, or AWU??
What about licenses and FEAT PKGS???
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top