Miran card

[NORTELCS]

My miran card is not accepting the keycode I have checked the dongle ID and the license in Nortel site and compare it with license which I have it was the same but every time I am trying to enter the key code it gives me invalid keycode.

 

[johnpoole]

all you can do is go to nortel tech support.. there is (was) a menu selection for keycode problems the last time i ran into that... if your entering them right, you just have a bad batch, i've seen it happen, not with the miran but several times with opt 11 and mermail upgrades

john poole
bellsouth business
columbia,sc

 

[Triton101]

on boot up on the LED display on the card check to make sure there are no errors.

Take a look at page 291 on the installers guide: Hexadecimal codes.
T:08 is when it tests the dongle....
also if you have spaces in the keycode, try adding the space or just try it without if you didn't already.

 

[NORTELCS]

Thank you guys for the support it was a dongle problem there was a fast err displaying on the LED display f: 08. I have taken the card out and the dongle was loss I have removed and push the holder down a bit and know it is accepting the licenses.

 

[johnpoole]

good catch, those can be a problem

john poole
bellsouth business
columbia,sc