Minimum software version for CLID name

[DTDude]

Just re-purposed an old Option 11 for my home lab. PRI is up and running just great, except I'm not getting incoming caller ID name.

Before I start digging in to try to find a configuration issue, what version was CLID name introduced on? I've seen some sources say any X11 25 system should be able to do it, some say 25.30 or 25.40. Mine is on 25.04.

 

[kstaff22]

The admin ntp I'm looking at says RCAP NDS release 25.40

 

[DTDude]

Damn! Thanks for the info.

 

[Firebird Scrambler]

Have you set CLID to yes under parameters in LD 17?. Then set up CDR on your TTY port to see if it is displayed on the left side with the incoming number and usually a few xxxx at the end.

I'm sure we had it working in the U.K. on older software releases.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[KCFLHRC]

How is your D-channel set up? NI2 or what?