MIK/MCK key used via MCDN

[42SKPK]

Hi

have someone experiences how to configure Nortel PBX for the "transfer" of MWI information (Message Waiting Indicator) messages between two PBX´s?

we have 2x small PBX´s interconnected via PRI-TIE using MCDN protokol. (PBX1=Nortel Rel5,5 & PBX2= Nortel Rel4,5)
What should I need set at both systems to the D-channel, Rout, CDB ... that I could "light up or off" MWI LED with MIK/MCK key from phone at PBX-1 on another phone connected to the PBX-2 ?

Thank you in advance for reply

 

[Firebird Scrambler]

Has the other PABX got the message waiting package enabled?. I think it's NMS package 175.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[42SKPK]

thank for help, unfortunately only one of them PBX got NMS package 175 enabled

 

[SL1M1]

Another one is check the PNI setting on your RDB (RouteDataBlock's) all should be the same usually PNI 00001
ISDN settings around the houses

Cheers !!

 

[42SKPK]

PNI setting is the same at all nodes, major issue is NMS package 175 is missing in one of these PBX. Thanx guys