Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Migration 6i to 9ias
- Thread starter thomgreen
- Start date
The process we used is just to open 6i reports in 9i report builder and save them in 9i format. The report builder will let you know if there are any problems with 6i reports. You can refer to the document
to see which features are not supported in 9i, but those are used rarely. The only real problem we faced is graphs. If your reports use graphs, those will need to be done again in 9i, which does not support ogd files and uses internal graphics builder based on BI Beans.
to see which features are not supported in 9i, but those are used rarely. The only real problem we faced is graphs. If your reports use graphs, those will need to be done again in 9i, which does not support ogd files and uses internal graphics builder based on BI Beans.
- Status
Similar threads
