Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Migrating from Frame Relay to PPP

Status
Not open for further replies.
pgaliardo

pgaliardo

MIS
Nov 30, 2004
887
We are switching our infrastructre from frame relay to PPP with dedicated T1 lines to 7 remote locations. I'm looking for some feedback from others that may have a similar setup. We currently have a Cisco 2620 router, but that is not expandable to the 7 WAN ports we will need. I am considering the Cisco 2800 series which has slots for 4 WIC cards. I would use 4 2 port cards in each slot (VWIC-2MFT-T1).

We have also gotten suggestions to try the Adtran 4205 router with a 8 port Octal T1 card.

I'm looking for feedback anyone who has had experience with either one of these routers, pros, cons, etc.

Thanks.
 
Status
Not open for further replies.

Similar threads

Tomwals
  • Locked
  • Question
Remote data transfer to flash the ECU
Replies
1
Views
204
Andyri
Andyri
Franck Louis
  • Locked
  • Question
Connecting Kompete Kontrol S61 to Home Cinema Amplifier Yamaha RX-A4A using RJ-45 cable
Replies
0
Views
215
Franck Louis
Franck Louis
Kjonnnn
  • Locked
  • Question
Connection to ONE particular website is limited.
Replies
4
Views
223
jerryreeve
jerryreeve
DrB0b
  • Locked
  • Question
Industrial Tech question - Cable to pass DC voltage and serial comm 1
Replies
4
Views
184
DrB0b
DrB0b
carolinamw
  • Locked
  • Question
Trying to connect two Trendnet Ti-pg1284i switches via fiber and sfp modules.
Replies
1
Views
103
BOKA
BOKA

Part and Inventory Search

Sponsor

Back
Top