Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

migrating from a 200ICP to a 5000

Status
Not open for further replies.

RossBC

Technical User
Jun 13, 2009
117
CA
we have been a 200 and 3300 dealer for years. we have just taken on the 5000 line and are soon to do our first "upgrade" from a 200ICP to a 5000 re-using the 5212 and 5224 sets. have gotten good at telling the customer what to expect when going from a 200ICP to a 3300, but have nothing on this migration.
Does anyone have a list of expected differences? I can see it will be quite long as HOLD is about the only feature that works the same and was hoping on a head start.
thank you very much for any insight. I will be posting in other forums and will update all with my compiled findings.
 
I think you more or less have it. They should consider it a brand new system and expect that everything is different.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top