Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS w/PRI. Karis Law and Ray Baum

Status
Not open for further replies.

tclubb

Vendor
Apr 20, 2005
29
US
I know that without SIP trunks Ray Baum act can't not be accomplished but thru ars we can comply to the Karis Act. should I first change the Access code from 9 to anuother number then program 911 thru dial codes. or just use prime line. for the sets that normally no outgoing access should i program toll restriction for those.
 
Confused with Baum this and Karis that, law firm?
Are you trying to ask...."is it possible to dial 911 without dialing an access code first?"

If so then yes.
Since your have a PRI you do not use Access codes, you use Dest codes and Routes.

I forget what I did but I will say what I currently think, others will chime in soon....

Remove 9 from External Code and Pool codes (this note is for those with POTs lines)
Remove Dest code 9
Build 2 new Dest codes:
9A (Any)
911

9A Absorb 1 - Use Route XXX
911 Absorb 0 - Use Route XXX (same route)

I think it was that simple, if you have recent software.







small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
I googled the names and now see the light.
Kind of close though...Baum was a lawyer!

It appears I have deleted my routes for that, I often mimic others systems here with my live system, often forgetting to put it back the way it was.










small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top