Im installing a mics nortel system. I gonig to have a pri coming into the system. My did's start at 0831 and i want my extensions to start with the same number sceem, but when i go to **startup and go through setting it up it wont allow me to enter 831 for a starting ext. Any ideas why it wont allow me to do so. thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mics startup
- Thread starter thekid88
- Start date
might want to post this in the bcm/northstar forum.. your dn's on a northstar don't start with a zero by default.. go through startup up, make the dn length 4 digits, then go in and change the dial 0 for att if you can, then try to use zero as a 1st digit..
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question