MICS extension gets blocked by itself

[matthias7]

Hi

I have an client that have an MICS old version and now one
extension get unusable but after unplugging the phone and plug it in again it acts normal for a while but now the error is appearing like every 2-3 days.

Change Extension or is the phone to blame, i have changes phones but appears more often with another old phone as well since the owner does not like to invest in an new PBX.

matt

 

[cook1082]

Could be a bad port , move it to another port.

 

[curlycord]

Put the set on a new port, if same issue check the cable or replace the phone.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[matthias7]

Hi

Thanks for your input, time will tell if bad port in PBX is the one to blame or not.

Tried with other old phone with same result so i think as well the port is bad but who knows for sure.

Matt

 

[joelunchpail]

check the set run and wiring.
try it temporarily in the equipment room
who knows what you will find in other peoples wiring in some old buildings, split pairs, opens, rat chewed shorts.
have also had bad amphenol cables. tip cross etc. they are pretty strange and come in pairs.

usually it is not the port. Norstars are almost bulletproof.