Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS 6.1 (Non-XC) SW Upgrade to 7.1 SW

Status
Not open for further replies.

DScot

Technical User
Apr 14, 2007
28
US
I am preparing to do my first MICS SW Upgrade. I see that an Upgrade Toolkit (cartridge) is needed for upgrades prior to 6.1 but see no mention of this cartridge needed for 6.1 to 7 or 7.1. Does anyone have step by step instructions for an upgrade from 6.1 to 7.1 non XC sw.?

This would be very helpful...

Thanks..
 
No tool required for 6.1 to 7.1

Power down
Remove amp cables
Swap software
Re-install amp cables
Power up
Wait

Suggest to always backup programming before an upgrade.
If adding hardware then do after upgrade.


=----(((((((((()----=
curlycord
 
Wow that easy eh?

Cool..... Thanks for the quick info!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top