Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micros RES 3700 Re-CAL Workstations Remotely

Status
Not open for further replies.
Mar 17, 2010
78
US
Is anyone aware of a way to remotely recal Micros workstations from the back office server?

I have an updated ISL file that I will be sending down to replace an existing ISL file. The file will be dropped in the appropriate CAL folder on the back office servers. In theory, the CAL service should pick up the file and move it over to the workstations. I have found the process to be a little unreliabe and was wondering if there was a way to force the CAL serice to update the workstations.

Thanks in advance
 
Usually a reboot has sufficed for me, which you can do from the back office control panel. Usually the initial startup of CAL catches anything it may have missed while waiting around..
 
If I ever need to re-cal a workstation remotely, I VPN to the office network, RDP to the Micros Server then create a VNC remote session from the VNC Viewer App to the Micros Till WS... thats assuming you have VNC running on the client WS...

Also if you ever need to drop any files onto the remote workstation, I use an FTP connection from the server to the individual WS...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top