Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micros mTablet mTab R Series "Authorization is Required for: Link mtablet with mStation"?

Status
Not open for further replies.

ReadySoftware

IS-IT--Management
Apr 18, 2018
3
US
Micros mTablet mTab R Series "Authorization is Required for: Link mtablet with mStation" after Factory Reset and is universal on 5.4, 5.4r2 and 5.4r3.

The mTab works flawlessly via WiFi and no base but the minute it is inserted to a base the error above shows and no active credentials in POS Config will work (pin and magstripe tried) only "invalid Authorization code" is shown for known active creds.

Pre-Factory Reset mTab R's will link and un-link from base with credentials (pin) consistently. Previous server was 5.5

What the heck am I missing here? Any help will be considered a favor that I hope I can return.

Stephen
 
there is a checkbox under the device table. look for it. if you can't find, tell me
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top