Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micros E7 cant make WS active question

Status
Not open for further replies.

kenhurst

Technical User
Jun 21, 2012
9
US
I have a 2 work station systme. WS #2 shows active network and active ws's on both machines. WS #1 shows active network connections on both and only itself as an active workstation.
Tried making it active and it says it can only be made locally. Not sure how to fix that since it is active on itself... Any help would be appreciated.
 
E7 is annoying them this happens. You are just lucky you only have 2 workstations.

Step 1. Set both workstations inactive. So from WS01 set WS01 inactive. From WS02 set WS02 inactive.
Step 2. Set WS01 back active from WS01. Set WS02 back active from WS02.

Both workstations should be synced up now.
 
Thanks that fixed the problem. Also any idea where to adjust the setting on it auto signing someone out after a minute of no activity? Typically at this restaurant it's only one person working the pos and they would like it to stay signed in longer before auto signing them out. Hope this makes sense. Thanks for your help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top