Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micros 9700 IP Change

Status
Not open for further replies.

JeffHTS

Vendor
Oct 11, 2017
3
US


I have a customer that wants to swap a workstation from one location to another. I believe this will require changing the IP address on the swap to identify it as the new workstation and have the peripherals work. I have gotten into configurator but the only IP address that seems to be able to be changed is the host. Any help would be appreciated
 
If you mean Location is a Revenue Center then...
The only thing what you need is to change the Revenue Center by the Workstation and also the IP.
If you change the IP there is a Reconfigure CAL needed.

If you mean Location is another Server
you have to Reconfigure CAL the Workstation with a new configured Workstation on the new server.
 
Actually, Both computers are located in the same restaurant. One is outside and one is inside. The one that outside is weathered and the screen laminate is peeling off which makes it hard to see in the sun so they wanted to move the inside unit outside because It's not used much. The wokstations are running windows pos ready 2009 and it seems like the only IP address we can change is the host. Reconfigure cal also does not load. We mostly deal with res3700 installs which would be easy but this is 9700.
 
Easiest way ist change the CF Card or replace the Harddisk to the other Workstation ???
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top