Hi,
Its seems that I have an issue where a WS5 runs out of OPS Memory, Physical Memory and then restarts.
The log files does not tell me much more than the fact that the Memory was out and its back again, and I can see that the POS has restarted. Strangely enough this only happens to one of the WS's (there are 2 on site) Below is a small bit of the Log, right after the restart happened.
Anybody have any ideas? I have formatted the flash cards, and ReCal runs perfectly fine.
1st restart
Tue Aug 01 10:35:17 2017 | WS01NN | OPS | 0 | OPS available memory was 0 KB, now 1031680 KB |
Tue Aug 01 10:35:17 2017 | WS01NN | OPS | 0 | Physical memory available was 0 KB, now 90492 KB
2nd restart (about 2hours later, with not much trade actually happening - shop is quite)
Tue Aug 01 12:28:15 2017 | WS01NN | OPS | 0 | OPS available memory was 0 KB, now 1031680 KB |
Tue Aug 01 12:28:15 2017 | WS01NN | OPS | 0 | Physical memory available was 0 KB, now 90516 KB |
Thanks,
Its seems that I have an issue where a WS5 runs out of OPS Memory, Physical Memory and then restarts.
The log files does not tell me much more than the fact that the Memory was out and its back again, and I can see that the POS has restarted. Strangely enough this only happens to one of the WS's (there are 2 on site) Below is a small bit of the Log, right after the restart happened.
Anybody have any ideas? I have formatted the flash cards, and ReCal runs perfectly fine.
1st restart
Tue Aug 01 10:35:17 2017 | WS01NN | OPS | 0 | OPS available memory was 0 KB, now 1031680 KB |
Tue Aug 01 10:35:17 2017 | WS01NN | OPS | 0 | Physical memory available was 0 KB, now 90492 KB
2nd restart (about 2hours later, with not much trade actually happening - shop is quite)
Tue Aug 01 12:28:15 2017 | WS01NN | OPS | 0 | OPS available memory was 0 KB, now 1031680 KB |
Tue Aug 01 12:28:15 2017 | WS01NN | OPS | 0 | Physical memory available was 0 KB, now 90516 KB |
Thanks,