charless777
Programmer
I have created an .ISL file to print a custom trailer and cannot figure out how to set format option for Bold
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Micros 3700 format receipt trailer text options
- Thread starter charless777
- Start date
- Status
I dont think there is an easy way of making the text bold.
You would probably have to get into sending commands to the printer using the chr() function.
Do you want some custom SIM scripts developed. Contact me via my website
You would probably have to get into sending commands to the printer using the chr() function.
Do you want some custom SIM scripts developed. Contact me via my website
Ive had a look through some of the programming guides for some of the common printers used with micros.
I dont see any that support Bold printing.
Do you want some custom SIM scripts developed. Contact me via my website
I dont see any that support Bold printing.
Do you want some custom SIM scripts developed. Contact me via my website
- Thread starter
- #4
charless777
Programmer
Hi,
Thank you so much for your time....
With the receipt being the last contact point of a transaction you would think that with such a robust system Micros would provide the tools to create a nice presentation.
I am playing around passing printer ESC sequences but am not going to invest much time with this approach. I will try the chr() approach as well, I forgot about that function.
I will keep you in mind if we need any SIM development.
Thank you so much for your time....
With the receipt being the last contact point of a transaction you would think that with such a robust system Micros would provide the tools to create a nice presentation.
I am playing around passing printer ESC sequences but am not going to invest much time with this approach. I will try the chr() approach as well, I forgot about that function.
I will keep you in mind if we need any SIM development.
- Thread starter
- #6
charless777
Programmer
Thanks folks!
Decided to go with the wide format.
If the trailer wasn't so long I would have created a bitmap with formatting but it took three bitmaps to complete the message which meant an 'eternity' to print.
Thanks again for the time spent helping me out. Just found this site.
Decided to go with the wide format.
If the trailer wasn't so long I would have created a bitmap with formatting but it took three bitmaps to complete the message which meant an 'eternity' to print.
Thanks again for the time spent helping me out. Just found this site.
Hey Charless777,
If you are printing on TM-88's try:
chr(27), chr(33), 1, "Your text here"
or even:
chr(27), chr(33), 8, "Your text here"
The first one is a bit value to select the Font B that printes support. The second one is the 'emphasize' bit value, though it comes out pretty damn large.
If you are printing on TM-88's try:
chr(27), chr(33), 1, "Your text here"
or even:
chr(27), chr(33), 8, "Your text here"
The first one is a bit value to select the Font B that printes support. The second one is the 'emphasize' bit value, though it comes out pretty damn large.
- Status