Recently upgraded a pair of 2010's to winpos 2009 from win2k and server was upgraded to res5.1 from 4.8. Afterwards, one unit runs fine but the other cannot run the touchscreen and also makes weird intermittent buzzing noises like a speaker distorting..
Tried various tsharc drivers to no avail, also chipset and graphics drivers that Micros sent me. Also since the working unit had a hardware ver -003 touchhead and the bad one had a -002, I swapped the -003 onto it to see if that was the issue, but no go.
Working unit is 1.07 firmware and bad one is 1.02 so I'm wondering if this might be the issue. But Micros was no help, told me they don't have firmware. Well, someone must have it somewhere. Anyone know where I might find some? Thanks.
Tried various tsharc drivers to no avail, also chipset and graphics drivers that Micros sent me. Also since the working unit had a hardware ver -003 touchhead and the bad one had a -002, I swapped the -003 onto it to see if that was the issue, but no go.
Working unit is 1.07 firmware and bad one is 1.02 so I'm wondering if this might be the issue. But Micros was no help, told me they don't have firmware. Well, someone must have it somewhere. Anyone know where I might find some? Thanks.