Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MiCollab (Nupoint 9.1.1.4) call forward via system speed call

Status
Not open for further replies.

TCSI17

Vendor
Mar 6, 2018
88
CA
Hi,
Is there a way on the MiCollab Nupoint voicemail system to be able to dial system speed calls that in turn dial a call forwarding code?
I've tried it by using the 'Alterate Transfer' in the call flow and entering the system speed call, but it does not work. I've also enabled the 'Call Forward Follow me Third Party' COS entry on Nupoint and on the PRI Lines COS but it still didnt work. I was just testing it to see if this is even possible.
Has anyone had the requirement to do such a thing?

Thanks!
 
i doubt that this would be possible
probably have to use something like disa

If I never did anything I'd never done before , I'd never do anything.....

 
i've managed it but it is not easy. I'm with Billz66 - Use DISA

**********************************************
Any intelligent fool can make things bigger and more complex… It takes a touch of genius – and a lot of courage to move in the opposite direction.
 
thanks for your insight!
That sounds like a good plan to use DISA.
much appreciated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top