Micollab Client Integration Wizard?

[Tinos]

Hi all.

How do you rerun the MCIW for the second time?

Thank you.

 

[jpruder]

Why? I think you would have to turn off the integration from command line via putty. I don't know the command but have seen tech support do it. It might show back up as an option if done. Never tried it.

 

[Tinos]

Controller deleted from Network Elements on Micollab server. When manually added back auto configuration of MIVB with users from Micollab side doesn't happen (Flow Through Provisioning not working).
I am also willing to factory reset Micollab server if there is a way to do that.
So I need a way to re-run MICW or to Factory Default. Please assist with how to do either or both.

 

[sarond]

Do you have access to Mitel KMS? This is not something I would not want post here.

KMS Article: HO2675

https://mitel.custhelp.com/app/answers/answer_view/a_id/1010371/

 

[Billz66]

to completely clear all micollab data - use ssh - login as admin
select restore from backup - this will clear all data - do areset and allow you to start again

If I never did anything I'd never done before , I'd never do anything.....

 

[Tinos]

Thank you Sarond.
@ Billz66 how do you restore from a backup if you don't have any ( meaning I don't want to use my current backup)?

 

[Billz66]

i dont hve access to a serer at the moment but from memory it goes like this

login as admin - go to restore menu
select it - console will warn that all data will be lost and will prompt for a reboot

after reboot it comes up to the do you want to restore from backup - just choose no and you have a blank Micollab server

If I never did anything I'd never done before , I'd never do anything.....

 

[Tinos]

Thanks the restore from no backup helped.