Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MICC services
- Thread starter Tinos
- Start date
ChrisMitel
Technical User
Try the below, this has worked for me in the past.
The service timeouts on startup of the operating system can occur when the system is too busy to start the service within the default 30 seconds. Starting of the service is stopped and the operating system will not attempt to start it again.
Resolution
Follow these steps to increase the length of the service startup timeout:
1. Click Start > click Run > type regedit and then click OK
2. Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3. Right-click Control > select New > DWORD Value
4. In the New Value #1 box, type ServicesPipeTimeout, and press ENTER
5. Right-click ServicesPipeTimeout > Modify
6. Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click OK
a. For example, to wait 60 seconds before the service times out, type 60000
7. Quit Registry Editor, and then restart the computer
Note: Rebooting the computer is not necessary, this is a setting only used during the startup of the operating system.
The service timeouts on startup of the operating system can occur when the system is too busy to start the service within the default 30 seconds. Starting of the service is stopped and the operating system will not attempt to start it again.
Resolution
Follow these steps to increase the length of the service startup timeout:
1. Click Start > click Run > type regedit and then click OK
2. Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3. Right-click Control > select New > DWORD Value
4. In the New Value #1 box, type ServicesPipeTimeout, and press ENTER
5. Right-click ServicesPipeTimeout > Modify
6. Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click OK
a. For example, to wait 60 seconds before the service times out, type 60000
7. Quit Registry Editor, and then restart the computer
Note: Rebooting the computer is not necessary, this is a setting only used during the startup of the operating system.
- Status
Similar threads
- Locked
- Question