Hello, i have a CS1000 7.5 system housed in an MG1010 cabinet. My company is looking for a conf solution where people can call into and enter a conferance integrated conf bridge solution and i know about the MICB. Will the MICB work in the MG1010 cabinet? or is there another solution better suited for this situation? I have done quite a bit of research online, but not much in regards to the newer 7.5 system using an MICB. Thanks for the help!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MICB for Avaya CS1000 7.5 system?
- Thread starter motox2
- Start date
Firebird Scrambler
Systems Engineer
I'm fairly certain that the MICB will work in a MG1010 cabinet as long as there is a spare card slot.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Question