Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mgu-capacity (dtmf-receiver)
- Thread starter lalrl
- Start date
The MGU does not have virtual IPLU boards, it is just considered a RTP resource and the 404 value is what is reported by the MGU (the SN is just printing what it gets from the MGU).
The resource on the MGU is dynamic and the capacity is shown in the MGU description document. All the handling of the seizure is done on the board, the SN sends a request for resource to the HW. The resources are obviously used for RTP resource but also for things like RVA, MoH and key code receivers.
In reality the value of 404 does not mean that much!
The resource on the MGU is dynamic and the capacity is shown in the MGU description document. All the handling of the seizure is done on the board, the SN sends a request for resource to the HW. The resources are obviously used for RTP resource but also for things like RVA, MoH and key code receivers.
In reality the value of 404 does not mean that much!
- Status
Similar threads
