Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MGCLK

Status
Not open for further replies.
TETech

TETech

IS-IT--Management
Feb 26, 2006
39
CA
Do I need a clock in a Cabinet before the IP trunks will enable the are all disabled now and I am assuming it is because there is no clock installed at this time.

Thanks
 
Sort by date Sort by votes
Nope. You only need a clock if you are going to do PRI. I have a 4.50 system that has been running as VoIP only with Virtual Trunks and IP Sets. Never had a clock in it.

911Guru
 
Upvote 0 Downvote
Ok Thx why do my trunks stay disabled
 
Upvote 0 Downvote
That's a pretty broad question!

Let's start by having you list the troubleshooting you have done and the conditions that you are finding with some detail, error messages, etc. and we can go from there.

911Guru
 
Upvote 0 Downvote
and have they ever worked.. ie if this is a new install then the reasons are almost always a missed prompt of download...

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
No clock is needed for vir trks, is this a new install?

Remember if it doesn't work hit it harder

Scott UK
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top