Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MGATE / Digital Card test

Status
Not open for further replies.

Ski123

Technical User
Mar 21, 2008
239
US
Without changing any program can you test a card slot that has an MGATE card in it by temporaraly putting in a Digital line card and testing for dial tone with a 2008 or 2616 ? We are having an issue where our CallPilot answers but we don't hear anything. WE have replaced the dialogic card in the 1005r already but no change.
 
did you re-run config wiz to flash the DSPs? re-install langs?

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
We replaced the dialogic board in the server. This got us to the point where we could get the CallPilot operational. We then found we had an issue where you could not change passwords either via the phone or the administration web page.We also found that no matter which USB port we tried for the dongle the system would always recognize the dongle as being in USB port I .The issue was been resolved by changing the dongle holder.
 
I fogot to mention we also had to change the MGATE card.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top